Automatic Autoclave

Laboratory Use Autoclave, CL-32 & CL-40 series

More safety and more ease !

♦ Quick Lock Lid
By the central lock lever, you can easily lock the lid with fingertip. The lid is lightened up and down by the automatic hinge. Even if you lose hold of the lid, it keeps stopped at the same position.

♦ Lid Interlock
The lid is locked reliably during operation and till cooling down to the safe temperature (80°C … adjustable by parameter).

♦ Electro Mechanical Lock
This function brings more safety to operator by locking the lid at the power failure or in the power OFF, to prevent operator from contamination by contacting un-sterilized objects carelessly. Locking is released only on standby state in the power ON.

♦ Graphic Display
The current operation process is indicated clearly.

♦ Timed Free Steaming
This reliable automatic air exhaust system guarantees always sure sterilization under pure steam exposure.

♦ Adjustable Automatic Exhaust
After sterilization process, steam is slowly released or cooled by the key set especially for liquid bottles.

♦ Warming & Dissolving of Culture Medium
Warming after sterilization and dissolving of culture medium.

♦ Water Cooling System of Exhaust-steam & Drainage of water … CL models
For no exhaust-steam and smell-down to your working room during air exhaust process or at operation end, the water cooling system with enough ability of steam condensation is provided inside the main body. Condensed water flow into the exhaust bottle in the front of main body. Also to clean the chamber bottom, the remained water is drained to the drain tray by opening the drain valve cock at inner side of exhaust bottle.

♦ Star-Timer by Calender
You can set operation start by month, day, hour and minute. The sterilized objects can be taken out at your next work-start.

♦ Memory Back Up
Even on a power failure, the process progress is memorized. When the power is returned, it is re-displayed.

♦ Mouth Boss for Object Temperature Sensor is provided on the Lid.
Through this mouth boss, one sensor for operation-start or three sensors for temperature distribution measurement can be set later (by option) with use of fitting accessory.

♦ Light to use … -S models
-32S and -40S models have low loading heights especially for heavy objects such as liquid bottles. It is possible to work with light steps.

♦ Warm Air Drying … CL-DP models
By warm flow through 0.2um micro-filter, the sterilized objects can be dried clearly and cleanly.
The vacuum-drying models (CLG series) with pulse pre-vacuum system by the vacuum pump are also prepared.

OPTIONAL FUNCTIONS:

• Object Temperature Sensor (for reliable sterilization)
• Automatic Water Supply (to save your manual water supply)
• Pre-Heating (to shorten the heating-up time)
• Rapid Cooling (to shorten the cooling time)
• Printer (to print the record of operation)
• Recorder (to check temperature distribution)

We can submit documents for GMP / GLP requirements

SPECIFICATION:

Model	Basic	CL-32S	CL-32L	CL-40S	CL-40M	CL-40L
	with warm air drying	CL-32SDP	CL-32LDP	CL-40SDP	CL-40MDP	CL-40LDP
Chamber (usable inner size) Capacity		Ø320x420mm 34L	Ø320x676mm 54L	Ø400x478mm 60L	Ø400x672mm 85L	Ø400x832mm 105L
Usable max. temperature Usable max. pressure		140°C 0.27MPa		137°C 0.25MPa
Usable temperature		Sterilization: 100 ~ 140°C		Sterilization: 100 ~ 137°C
		Dissolving: 40 ~ 99°C, Warming: 40 ~ 60°C
Usable time		Sterilization, Dissolving: 0min. ~ 48hrs. 00min. And continous, Warming: 0min. ~ 48hrs. 00min
Controller		Microprocessor controller, graphic display Temperature … 3 digits, PID control Timer … 2 digits hours : 2 digits minutes, down count (Temperature / Time integration system)
Operation pattern		A: Heating –> Sterilization –> Exhaust (adjustable) B: Heating –> Sterilization –> Exhaust (adjustable) –> Warming C: Disolving –> Warming
-DP models	Operation pattern with drying	D: Heating –> Sterilization –> Drain –> Drying (Full automatic operation) E: Only Drying
	Drying devices	Hot air circulating and discharge by electric heater and air pump through 0.2um micro cartridge filter of untake passage. Temperature range: 60 ~ 150°C, Timer range: 0min. ~ 99hrs.59min. and continuous
Air exhaust device		Temperature (99°C … adjustable) sensing, time (3min. … adjustable) control & solenoid valve (Time free steaming system)
Exhaust cooling system		Water storage tank with cooling coil & Exhaust drain receiver bottle
Drain valve		Manaul valve at inner side of exhaust bottle: CL models ; Manual & Automatic valve: CL-DP models
Option	Auto, water supply	Automatic water supply system from city-water-faucet by level sensor-controller
	Pre-heat system	To shorten the come-up time, at 60°C. Provided only with auto. water supply.
	Rapid cooling system	Chamber cooling system by 1 ~ 2 fans
Safety	Safety devices	Interlock system, Electro mechanical lock system Double check system of lid close, Over pressure detector Over temperature detector, Water lack preventor, Sensor break indicator Abnormal time indicator, Memory of power failure, Safety valve Breaker for slight leakage, over current & short circuit
	Safety valve operation	0.29MPa		0.27MPa
	Water test pressure	0.58MPa		0.54MPa
Material	Chamber & Lid	Stainless steel SUS304, shiny polished. Molded silicon rubber lid gasket (self-seal system)
	Outer panel	Steel with baked melamine finish. Top panel: Heat-resisting molded resin
Power demand (50/60Hz)		AC220 / 2320 / 240V, 1 phase, 50/60Hz
		2.6kW, 12A		4.0kW, 18A
Outer dimensions (WxDxH)		550x550x870mm	550x550x990mm	620x650x880mm	620x650x1000mm	620x650x1160mm
Weight		56kg	60kg	72kg	78kg	84kg
Accessories	Stainless wire basket	Ø300x200mmx2pcs.	Ø300x300mmx2pcs.	Ø380x200mmx2pcs.	Ø380x300mmx2pcs.	Ø380x400mmx2pcs.
		Standard for CL models as above. Optional for all CL-DP models.
	Others	Exhaust bottle & chamber drain tray (for CL models). Stainless flexible drain hose (for CL-DP models)
Optional accessories		Object temperature sensor, Printer, Recorder, Basket with pan, Bucket, Dressing drum