Nalgene Beakers
Your Location: Main>Consumables>Plasticware>
Thermo Scientific™ Nalgene™ Beaker
Rely on plastic beakers for a safer alternative to glass, especially in larger sizes. They won’t break, chip or shatter during use and cleaning. Lightweight and easy to handle. Chemical resistance, heat tolerance (not for use on hot plates), and spout design make Thermo Scientific™ Nalgene™ Griffin low-form beakers a perfect long-term solution for your graduated beaker choice. Meeting the ISO/DIN 7056 International Standards for Laboratory Plastic Beakers, our polypropylene and polymethylpentene beakers enable precise measurements. Nalgene beakers with handles offer reliable support and dispensing control. Nalgene beakers are made only from high quality laboratory grade plastic materials for dependably lower levels of potential leachables and extractables, so you can rely on them for everyday lab use without interfering with your work.
| Nalgene PPCO Griffin Low-Form Plastic Beakers | Nalgene PMP Griffin Low-Form Plastic Beakers | Nalgene PFA Griffin Low-Form Plastic Beakers |
Nalgene HDPE Graduated Plastic Beakers with Handles | Nalgene PMP Graduated Plastic Beakers with Handles | Nalgene PFA Graduated Plastic Beakers with Handles |
| Milky white, graduated, good chemical resistance | Transparency of glass, graduated, excellent chemical resistance, heat tolerance | Milky white, heavy wall, ultimate chemical resistance, heat tolerance | Milky white, extra-heavy wall, sturdy rectangular handle, reliable support, dispensing control | Transparent, graduated, sturdy rectangular handle, easy, safe handling and pouring | Milky white, heavy wall, ultimate chemical resistance, heat tolerance |
 |
 |
 |
 |
 |
 |
| Meets ISO/DIN 7056**, 21 CFR Pt 177.1520 | Meets ISO/DIN 7056″”, 21 CFR Pt 177.1520 | — | Meets 21 CFR Pt 177.1520 | Meets 21 CFR Pt 177.1520 | — |
| Autoclavable | Autoclavable | Autoclavable | Not autoclavable | Autoclavable | Autoclavable |
| Max use 121oC* | Continuous use 150oC intermittent use up to 170oC* | Max Use 250oC* | Max use 120oC* | Continuous use 150oC intermittent use up to 170oC* | Max Use 250oC* |
| Graduations: silk screened |
Graduations: silk screened |
No graduations | Graduations: molded-in; oz and mL |
Graduations: molded-in; oz and mL |
Graduations: molded-in; oz and mL |
| Volume range: 30mL–4L |
Volume range: 50mL–4L |
Volume range: 50mL–1L |
Volume range: 1L, 3L |
Volume range: 1L, 3L |
Volume range: 1L, 3L |
| PPCO | PMP | PFA | HDPE | PMP | PFA |
| Translucent white | Clear | Translucent white | Translucent white | Clear | Translucent white |
| No handle | No handle | No handle | Handle | Handle | Handle |
| Nesting | Nesting | Nesting | Not nesting | Not nesting | Not nesting |
| BPA free | BPA free | BPA free | BPA free | BPA free | BPA free |
| Phthalate-free | Phthalate-free | Phthalate-free | Phthalate-free | Phthalate-free | Phthalate-free |
Thermo Scientific™ Nalgene™ Polypropylene Griffin Low-Form Plastic Beakers
Nalgene™ Griffin Low-Form Beakers provide excellent chemical resistance and convenient stacking capabilities.
All sizes have easy-to-read silk-screened graduations.
details
• No drip, single-spout design provides precision pouring control
• With ribs for easy stacking
• Silk screened with graduations, size code, resin code, catalog number, max. temperature and “No Flame” symbol for easy identification and safe use
• Autoclavable/Graduated
Compliance: Meets ISO/DIN 7056 International Standards for Laboratory Plasticware Beakers.
Notes: Not for use on hotplates.
Nalgene Griffin Low-Form Beakers
| Cat. No. | Capacity (ml) | No. per Pack | No. per Case |
| 1201-0030 | 30 | 12 | 48 |
| 1201-0050 | 50 | 12 | 48 |
| 1201-0100 | 100 | 12 | 48 |
| 1201-0150 | 150 | 12 | 48 |
| 1201-0250 | 250 | 6 | 36 |
| 1201-0400 | 400 | 6 | 36 |
| 1201-0600 | 600 | 4 | 24 |
| 1201-1000 | 1000 | 3 | 12 |
| 1201-2000 | 2000 | 1 | 6 |
| 1201-4000 | 4000 | 1 | 4 |
Thermo Scientific™ Nalgene™ PMP Griffin Low-Form Plastic Beakers
Nalgene™ Griffin Low-Form Beakers are suitable for continuous use at 150°C with intermittent service to 175°C.
Beakers have the transparency of glass, excellent chemical resistance and heat tolerance. All size beakers have easy to read silk-screened graduations.
details
• Transparent PMP material allows a clear view of beaker contents
• No-drip, single-spout design provides precision pouring control
• With ribs for easy stacking
• Silk-screened with graduations, size code, resin code, catalog number, max. temperature and “No Flame” symbol for easy identification and safe use
• Autoclavable/Graduated/Transparent
Compliance: Meets ISO/DIN 7056 International Standards for Laboratory Plasticware Beakers.
Notes: Not for use on hotplates.
Nalgene Griffin Low-Form Beakers
| Cat. No. | Capacity (ml) | No. per Pack | No. per Case |
| 1203-0030 | 30 | 12 | 36 |
| 1203-0050 | 50 | 12 | 36 |
| 1203-0100 | 100 | 12 | 36 |
| 1203-0150 | 150 | 12 | 36 |
| 1203-0250 | 250 | 6 | 24 |
| 1203-0400 | 400 | 6 | 24 |
| 1203-0600 | 600 | 4 | 12 |
| 1203-1000 | 1000 | 3 | 12 |
| 1203-2000 | 2000 | 1 | 4 |
| 1203-4000 | 4000 | 1 | 4 |
Thermo Scientific™ Nalgene™ Griffin Low-Form PFA Plastic Beakers
Nalgene™ Low-Form Beakers are molded from chemically-resistant perfluoroalkoxy resin.
Heavy-wall design makes these beakers sturdy and tough for continual lab usage.
Tolerates a wide temperature range: -270°C to +250°C.
details
• No-drip single-spout design provides precision pouring control
• Highly resistant to most chemicals, including the strongest sulfuric, nitric, chromic and phosphoric acids – will not contaminate contents with leachables
• Withstands extreme temperatures from -270°C to +250°C for versatility in your lab
• Autoclavable/PFA
Notes: Not for use on hotplates.
Teflon® is a registered trademark of DuPont used under license by Nalge Nunc International Corporation.
Nalgene Griffin Low-Form Beakers
| Cat. No. | Capacity (ml) | No. per Pack | No. per Case |
| 1510-0050 | 50 | 1 | 6 |
| 1510-0100 | 100 | 1 | 6 |
| 1510-0250 | 250 | 1 | 6 |
| 1510-0600 | 600 | 1 | 4 |
| 1510-1000 | 1000 | 1 | 4 |
Thermo Scientific™ Nalgene™ Graduated HDPE Plastic Beakers with Handles
Nalgene™ HDPE Beakers with handles feature an extra-heavy wall for safe handling of acids, alkalis and hot solutions.
Sturdy rectangular handle is easy on the hands, and provides reliable support and dispensing control.
details
• Molded-in graduations in both oz. and mL won’t wear off with continuous use or washings
• Molded-in rectangular handle provides easy, safe handling and pouring
• Excellent chemical resistance makes these usable for a wide range of solutions
• Graduated
Notes: Not for use on hotplates.
Nalgene Graduated Beakers with Handles
| Cat. No. | Capacity (ml) | No. per Pack | No. per Case |
| 1220-1250 | 1000 | 1 | 6 |
| 1220-2500 | 3000 | 1 | 6 |
Thermo Scientific™ Nalgene™ PMP Graduated Plastic Beakers with Handles
Nalgene™ PMP Beakers resist acids, bases, aliphatic alcohols, aldehydes and esters.
Beakers have rectangular handle for easy carrying and pouring and withstand continuous use at high temperatures.
details
• Withstands continuous exposure to temperatures as high as 150°C and intermittent temperatures to 175°C
• Transparent to microwaves
• Transparent PMP material allows a clear view of beaker contents
• Molded-in graduation in both oz. and mL won’t wear off with continuous use or washings
• Excellent chemical resistance to acids, bases and aliphatic alcohols make these beakers useful for a broad range of solutions
• Sturdy, molded-in rectangular handle provides easy, safe handling and pouring
• Autoclavable/Transparent/Graduated
Notes: Not for use on hotplates.
Nalgene Graduated Beakers with Handles
| Cat. No. | Capacity (ml) | No. per Pack | No. per Case |
| 1223-1000 | 1000 | 1 | 6 |
| 1223-3000 | 3000 | 1 | 6 |
Thermo Scientific™ Nalgene™ PFA Graduated Plastic Beakers with Handles>
Nalgene™ Beakers with Handles feature extraordinary chemical resistance and can be used repeatedly for high-purity applications.
Can be used (and re-used) with strong oxidizing agents, acids, hydrocarbons and ketones. Widest temperature range: -270°C to +250°C. Not for use on hot plates. Teflon® PFA is “non-stick” making the beaker easy to clean and resistant to contamination.
details
• Withstands exposure to extreme temperatures from -270°C to 250°C
• Rigid and translucent, enabling easy and consistent viewing of liquid levels
• Molded-in graduation in both oz. and mL won’t wear off with continuous use or washings
• Excellent chemical resistance to strong ozidizing agents, acids, hydrocarbons and ketones make these beakers useful for a broad range of high-purity applications
• Molded-in rectangular handle provides easy, safe handling and pouring
• Autoclavable
Notes: Not for use on hotplates.
Teflon® is a registered trademark of DuPont used under license by Nalge Nunc International Corporation.
Nalgene Graduated Beakers with Handles
| Cat. No. | Capacity (ml) | No. per Case |
| DS1511-1000 | 1000 | 1 |
| DS1511-3000 | 3000 | 1 |