Omnia XS Basic (Compact)
OmniaPure XS Basic
The specialist.
For H2O pure type I .
When your need is for highest quality pure water that fulfils the demands of analytical and life science laboratory requirements, then one of these OmniaPure systems will be the right choice for you. The incorporated pre-treatment constantly ensures the reliability of your experimental results and reduces running costs.
Features
• OptiFill basic dispenser is standard
• Spent filters are simply and quickly exchanged
• Leakage sensor is standard
• Integrated pressure reducer is standard
• Very space saving
• Ready-to-use, including filter cartridges
One hand operation
Easy water dispensing
Flexible on a work surface
Flow Chart
| Model no. | System type | Typical applications |
| 18000004 | OmniaPure xs basic | AAS, IC, ICP, buffers and media preparation |
| 18000005 | OmniaPure xs basic UV | Ultra-trace analysis, ICP-MS, HPLC, TOC-analysis |
| Specifications | OmniaPure xs basic | OmniaPure xs basic UV |
| Ultrapure water values type I | ||
| Conductivity at 25 °C [μS/cm] | 0.055 | 0.055 |
| Resistance at 25 °C [MΩ x cm] | 18.2 | 18.2 |
| TOC-value* [ppb] | <5 | <2 |
| Dispensing performance [l/min.] | up to 2 | up to 2 |
| Dispensing preset volumes | optional | optional |
| Particles** > 0.2 μm [1/ml] | <1 | <1 |
| Bacteria** [KBE/ml] | <0.01 | <0.01 |
* The values given are typical and may vary depending on the quality of the feed water
** With sterile filter capsule 0.2 μm
OmniaTap XS Basic
The Allrounder.
For H2O pure types I+II .
OmniaTap xs basic is the ideal system when both pure water and ultrapure water are required, but in relatively small amounts. The ability to provide both types from a single system results from the combination of ultramodern purification technologies. These also make it possible to connect the system directly to tap water. A press on the dispenser button activates dispensing of ultrapure water type I via the digital dispenser control. The recirculation of the pure water held in the installed 7 litre tank keeps it permanently at type II quality. The pure water tank provides a second optional outlet for feeding downstream end users.
Features
• OptiFill basic dispenser is standard
• Spent filters are simply and quickly exchanged
• Leakage sensor is standard
• Ready-to-use, including filter cartridges
One hand operation
Easy water dispensing
Flexible on a work surface
Flow Chart
| Model no. | System type | Typical applications |
| 18110051 | OmniaTap xs basic 5 | AAS, IC, ICP, buffers and media preparation |
| 18110052 | OmniaTap xs basic 5 UV | Ultra-trace analysis, ICP-MS, HPLC, TOC-analysis |
| Specifications | OmniaTap xs basic 5 | OmniaTap xs basic 5 UV |
| Ultrapure water values type II | ||
| Pure water performance at 15 °C [l/h] | 5 | 5 |
| Conductivity at 25 °C [μS/cm] | 0.067 up to 0.1 | 0.067 up to 0.1 |
| Resistance at 25 °C [MΩ x cm] | 15 up to 10 | 15 up to 10 |
| Ultrapure water values type I | ||
| Conductivity at 25 °C [μS/cm] | 0.055 | 0.055 |
| Resistance at 25 °C [MΩ x cm] | 18.2 | 18.2 |
| TOC-value* [ppb] | <5 | <2 |
| Dispensing performance [l/min.] | up to 2 | up to 2 |
| Dispensing preset volumes | optional | optional |
| Particles** > 0.2 μm [1/ml] | <1 | <1 |
| Bacteria** [KBE/ml] | <0.01 | <0.01 |
* The values given are typical and may vary depending on the quality of the feed water
** With sterile filter capsule 0.2 μm