OmniaTap (Type I + II water)
OmniaTap
Der Allrounder.
For H2O pure types I + II.
OmniaTap is the ideal system when both pure water and ultrapure water are required, but in relatively small amounts. The ability to provide both types from a single system results from the combination of ultramodern purification technologies. These also make it possible to connect the system directly to tap water. A press on the dispenser button activates dispensing of ultrapure water type I via the digital dispenser control. The recirculation of the pure water held in the installed 10 litre tank keeps it permanently at type II quality. The pure water tank has a second outlet for feeding downstream end users.
Features
OptiFill dispenser is standard
Pretreatment set for direct connection to tap water
10-litres pure water tank
Tank volume display in percent
Simple and economical filter replacement
Leakage sensor is standard
Ready-to-use, including filter cartridges
One hand operation
Easy water dispensing
Flexible on a work surface
Flow Chart
| Specifications | OmniaTap | OmniaTap UV | OmniaTap UV/UF |
| Type I | |||
| Conductivit µS/cm | 0.055 | 0.055 | 0.055 |
| Resistance MΩ x cm | 18.2 | 18.2 | 18.2 |
| TOC-value* ppb | 5 – 10 | 1 – 5 | 1 – 5 |
| Dispensing performance l/min. | up to 2 | up to 2 | up to 1.6 |
| Endotoxins* EU/ml | – | – | < 0.001 |
| Particles**/ml | < 1 | < 1 | < 1 |
| Bacteria** CFU/ml | < 0.1 | < 0.1 | < 0.1 |
| Type II | |||
| Pure water performance l/h at 15 °C | 6 or 12 | 6 or 12 | 6 or 12 |
| Conductivity µS/cm | 0.067 – 0.1 | 0.067 – 0.1 | 0.067 – 0.1 |
| Resistance MΩ x cm | 15 – 10 | 15 – 10 | 15 – 10 |
| Pure water tank pressurized outlet | optional | optional | optional |
| Feedwater requirements | |||
| Tap water according to DIN 2000 | |||
| Feedwater temperature °C | + 2 up to 35 | + 2 up to 35 | + 2 up to 35 |
| Manganese and iron content mg/l | < 0.05 | < 0.05 | < 0.05 |
| Free chlorine content mg/l | < 0.1 | < 0.1 | < 0.1 |
| Silt density index (SDI) | max. 3 | max. 3 | max. 3 |
| Technical data | |||
| Operating pressure bar | 2 – 6 | 2 – 6 | 2 – 6 |
| Supply voltage Volt/Hz | 90-240/50-60 | 90-240/50-60 | 90-240/50-60 |
| Connected load kW | 0.1 | 0.1 | 0.1 |
| Connector size mm | 3/4″ | 3/4″ | 3/4″ |
| Ambient temperature °C | + 2 up to + 35 | + 2 up to + 35 | + 2 up to + 35 |
| Dimensions*** W x H x D mm | 390 x 720 x 615 | 390 x 720 x 615 | 390 x 720 x 615 |
| Weight kg | 20 | 21 | 21 |
| * in dependence on the feedwater quality ** with sterilizing filter 0.2 µm *** with OptiFill Dispenser | |||
| Order no. | System type* | Typical applications |
| 18200051 | OmniaTap 6 | AAS, IC, ICP, buffers and media preparation |
| 18200101 | OmniaTap 12 | AAS, IC, ICP, buffers and media preparation |
| 18200052 | OmniaTap 6 UV | Ultra-trace analysis, ICP-MS, HPLC, TOC |
| 18200102 | OmniaTap 12 UV | Ultra-trace analysis, ICP-MS, HPLC, TOC |
| 18200053 | OmniaTap 6 UV/UF | Life science and microbiology, cell culture media |
| 18200103 | OmniaTap 12 UV/UF | Life science and microbiology, cell culture media |
| Accessories | |
| 19200300 | Wall mount Omnia |
| 19200056 | Disinfection kit Omnia |
| 19200057 | Disinfectant Omnia – 3 pcs./pack |
| 19200021 | Pre-treatment unit OmniaTap –10“ |